液固对流相变问题的焓式有限元法

本文基于焓的对流扩散方程,提出一种求解具有糊状区液固相变对流传热问题的有限元方法,避免了通常采用温度对流扩散方程进行数值求解所带来的许多困难,对问题的解决更加自然、简便。算例表明,本文提出的方法是有效且可行的。     

基于MARG的无人机抗干扰系统的研究

由IMU或电子罗盘组成的无人机航姿测量系统易受载体有害加速度或周围局部磁场干扰导致姿态角解算不准确。针对该问题提出将自适应扩展卡尔曼滤波算法应用于该系统。在卡尔曼滤波算法中提出引入分段函数构造自适应测量噪声方差阵。相比于传统噪声方差阵的阈值判断方法,该方法提高了传感器信息的利用率,进一步减小了外界干扰对系统姿态估计的影响,最终提高了姿态角的解算精度。最后针对该方法进行了仿真分析和无磁转台实验验证,仿真和实验结果表明,该方法能有效提高无人机航姿测量系统的抗干扰能力,具有一定的应用价值。     

CdTe量子点-铜酞菁复合体系荧光共振能量转移的研究

以波长为780 nm、重复频率为76 MHz、脉宽为130 fs的飞秒激光作为激发光源, 采用超快时间分辨光谱技术研究了CdTe量子点-铜酞菁复合体系的荧光共振能量转移. 实验结果表明, 在780 nm的双光子激发条件下, 复合体系中CdTe量子点的荧光寿命随着铜酞菁溶液浓度的增加而减少, 荧光共振能量转移效率增加. 同时也研究了激发功率对荧光共振能量转移效率的影响. 结果表明, 随着激发光功率的增加, 复合体系溶液中CdTe量子点的荧光寿命增加, 荧光共振能量转移效率减小, 其物理机理是因为高激发功率下的热效应和由双光子诱导的高阶激发态的跃迁. 当激发光功率为200 mW时, 双光子荧光共振能量转移效率为43.8%. 研究表明CdTe量子点-铜酞菁复合体系是非常有潜力的第三代光敏剂.     

CdTe量子点与罗丹明B水溶液体系下的双光子激发荧光共振能量转移

采用时间分辨荧光光谱技术研究了在双光子激发下不同尺寸的量子点与罗丹明B 之间的荧光共振能量转移. 研究结果表明, 在800 nm的双光子激发条件下, 体系间能量转移效率随着供体吸收光谱与受体荧光光谱的光谱重叠程度增加而增加; 理论分析表明, 供体和受体间的Förster半径增加是导致其双光子能量转移效率增大的物理原因. 同时, 研究了罗丹明B浓度对荧光共振能量转移效率的影响. 研究结果表明, 量子点的荧光寿命随着罗丹明B浓度的增加而减小; 量子点与罗丹明B之间的荧光共振能量转移效率随着罗丹明B浓度的增加而增加; 当罗丹明B浓度为3.0×10^-5 mol·L^-1时, 双光子荧光共振能量转移效率为40.1%.     

Deciphering an Abnormal Layered‐Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large‐scale energy storage systems have driven the development of layered transition‐metal oxide cathodes for room‐temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered‐tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered‐tunnel electrode shows outstanding electrochemical performance in sodium half‐cell system and excellent compatibility with hard carbon anode in sodium full‐cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium‐ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high‐energy X‐ray diffraction and ex situ X‐ray absorption spectroscopy as well as operando X‐ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Engineering Sensitized Photon Upconversion Efficiency via Nanocrystal Wavefunction and Molecular Geometry

Triplet energy transfer from inorganic nanocrystals to molecular acceptors has attracted strong attention for high‐efficiency photon upconversion. Here we study this problem using CsPbBr₃ and CdSe nanocrystals as triplet donors and carboxylated anthracene isomers as acceptors. We find that the position of the carboxyl anchoring group on the molecule dictates the donor‐acceptor coupling to be either through‐bond or through‐space, while the relative strength of the two coupling pathways is controlled by the wavefunction leakage of nanocrystals that can be quantitatively tuned by nanocrystal sizes or shell thicknesses. By simultaneously engineering molecular geometry and nanocrystal wavefunction, energy transfer and photon upconversion efficiencies of a nanocrystal/molecule system can be improved by orders of magnitude.     

Li/Garnet Interface Stabilization by Thermal-Decomposition Vapor Deposition of an Amorphous Carbon Layer

Applying interlayers is the main strategy to address the large area specific resistance (ASR) of Li/garnet interface. However, studies on eliminating the Li₂CO₃ and LiOH interfacial lithiophobic contaminants are still insufficient. Here, thermal-decomposition vapor deposition (TVD) of a carbon modification layer on Li_6.75La₃Zr_1.75Ta_0.25O₁₂ (LLZTO) provides a contaminant-free surface. Owing to the protection of the carbon layer, the air stability of LLZTO is also improved. Moreover, owing to the amorphous structure of the low graphitized carbon (LGC), instant lithiation is achieved, and the ASR of the Li/LLZTO interface is reduced to 9 Ω cm². Lithium volatilization and Zr⁴⁺ reduction are also controllable during TVD. Compared with its high graphitized carbon counterpart (HGC), the LGC-modified Li/LLZTO interface displays a higher critical current density of 1.2 mA cm⁻², as well as moderate Li plating and stripping, which provides enhanced polarization voltage stability.     

Optimization of SIMS analytical parameters for water content measurement of olivine

Secondary ion mass spectrometry (SIMS) has a wide range of applications in Earth Science research, thanks to its high precision and sensitivity, and its capacity in direct insitu micromeasurement. The technique is operated in ultra-high vacuum (UHV) conditions, especially for the measurement of volatiles such as hydrogen, or the water content in nominally anhydrous minerals (NAMs). To minimize the water background and obtain accurate and precise water contents in NAMs (eg, olivine) critical parameters such as presputtering time, field aperture (FA), dynamic transfer on/off, and primary beam current intensity were investigated for a CAMECA IMS 1280-HR system. When the chamber vacuum reaches approximately 2 × 10⁻⁹ mbar, we set the DTOS OFF, raster size to 50 μm and primary beam current to 5 nA, and used 2000 μm FA and 170-second presputtering time. Consequently, an approximately 1.2 ppmw water background and 3.6 ppmw limit of detection (LOD) were yielded, from analyzing the San Carlos olivine. Meanwhile, the water content and homogeneity of a range of olivine minerals were characterized for potential use as reference materials for SIMS water content measurement. Olivine water content calibration curve was also established by comparing the Fourier transform infrared (FTIR) results with the SIMS-measured ¹⁶O¹H⁻/¹⁶O⁻ ratios. Accuracy and precision of water content measurement were estimated to be better than approximately 10% in this study.